Professional 2-chuck tube cutting; Compatible to X/Y/Z/U axis servo based on EtherCAT.
- Center search by 4 sides: real-time offset compensation to tube center which facilitates clamping and improve piercing accuracy increasingly.
- Applicable to cutting of L, U, H profile as well as circular and rectangular tube. Individual corner process is supported to improve corner cutting quality.
- Supports the application of auxiliary axis and cylinders such as support axis, support cylinders, automatic control of upload/download materials, dust removal axis and dust removal cylinders, etc.
- Compatible to processing by manual G code modification.
- Graphic and NC file import: SJ or STEP. Graphics could be sorted or directed cut.
- Supports auto feeding.
- Compatible to CAM software from 3rd party.
- Communication: EtherCAT protocol control with real-time refresh cycle 1ms.
- Accuracy: path 0.005mm, positioning 0.001mm, repeated positioning 0.002mm.
- Speed: max. acceleration 2G, max. cutting 40mm/min, max. dry motion 100m/min.
- Safety: overload protection to axis moment, real-time monitoring to axis moment to stop and upload servo alarm.
- Alarm: alarm log export to give reference to operator.
- Commissioning: close-loop arc detection feature to save commissioning time. Torque monitoring feature to detect the status of mechanical meshing if it is too tight or loose.
|HMI PC (Master)||EPC-1010 (Windows)||Analog Input||4|
|Engine PC (Slave)||EPC-2000 (Linux)||Analog Output||4|
|Extended I/O Module||EDS2010||General Axis Interface (Pul/Dir)||4 (X/Y/Y1/Z)|
|Digital Input||40||F axis Interface (Auto Focus)||1|
|OC Output (24V)||16||Height Sensor Interface||1|
|Transistor Output||8||Software||Tube Cut software nesting|